 |
| Injection Molding In China |
Cold runner mold
Cold runner mold, injection mold is the
most common type. The gates and runner mold used for injection of the plastic
in each mold cavity. However, the sprue and runner and some hardened once
solidified. Workers then these works and recycling. This may cause the waste
problem, which may make their economic use.
Two plate cold runner mold
Two plate cold runner mold is so named because they are characterized by two plates together. Only a parting surface that must be located in the runner. This is the easiest cold runner mold.
Three plate cold runner mold
Three plate cold runner mold has three, which
means that there is one pair of parting planes. Three of the manifold, the
movable plate and floating panels. Contains half of the gate hot runner plate
and the runner-up. The injection system comprising half of the movable plate
and the geometric shape of the part. The other half of the rotor included in
the floating plate and geometry. The system can be located in any of the
parting, and anywhere on the surface can be selected through the sheet to
provide flexibility.
Hot runner mold
Hot runner mold provides a different way of plastic. As part of the runners, although a plastic syringe and cool the cold runner, the hot runner mold in the mold and stored in the temperature higher than the melting point of the plastic. This means that the gate and runner sclerosis will never have a chance. This also reduces the amount of plastic waste. However, the hot runner injection mold requires more skill and maintenance, and have a higher baseline costs. However, they tend to save materials according to their own.
CN-moulding is professional injection mold manufacturer, we can make difference kind of mold
for difference kinds of industrial.
