consumer goods companies move, indurial goods also will move

"Migratory birds" fly to Southeast Asia
Southeast Asia is another choice of the capital.
Received Adidas notice to terminate the contract, Sun Yingli some by surprise, the two sides agreed to the contract period is supposed to be until the end of 2015.
Adidas OEM grandson of the company since 1996, the two sides signed in 2006 a long-term cooperation agreement.
Then coincides with the the Adidas golden age of production in China. In 2007, Adidas Group footwear products under half of production in China. But then, Adidas started to increase supplier diversity strategy. 2011 annual report mentioned, the high import duties levied some Latin American countries, exports of footwear products to China, which is Adidas production base further decentralized configuration.
By 2011, the proportion of Group Adidas footwear products from China is still the largest, but has been reduced to 35%. Indonesia, Cambodia and other Southeast Asian countries significantly increase the latter's share more than doubled.
"Adidas Suzhou plant is shut down for re-integration of global resources strategy considerations, this strategy will help Adidas better play our economies of scale and reduce complexity." Adidas provide an official response to the Southern Weekend reporter leak, tried to shut down cool event, "close the plant not only has nothing to do with the salary increase, also has nothing to do with our inventory of Adidas in China's stock in good condition."
But in fact, the secret is to plant transfer costs. In July 2008, global Adidas CEO Herbert Hainer said the German media in China, by the government-set wage standards gradually becomes too high, the company hopes to partially withdraw from China, transfer to cheaper labor areas. Just four years ago Heiner's statements, triggering the production line will be transferred outside Adidas guess.
Compared with four years ago, China's rising labor costs to be getting worse. "If you include social insurance, we are here to the average worker's monthly salary of more than 3,000 yuan. Doubled compared with two years ago, but we also worry about being unable to recruit workers, hire workers, a high turnover rate." Li Xin (a pseudonym), a Fujian Adidas middle of the foundry business, recruitment, looking around for someone to help.
The new Lee said his corporate human costs accounted for the proportion of turnover from 12% two years ago to about 30%.
Side the the bullish labor costs in China, the other side is Indonesia, Vietnam and other Southeast Asian countries, the adult labor force each month about the salaries of more than one thousand yuan, Li Xin where the company began to expand overseas branch, three factories in Vietnam has Indonesia landing.
Compared with Adidas, rival Nike, the pace of the transfer of production bases to go far greater. Since 2005, Nike has increased year by year the of Vietnam factories in the proportion of its manufacturing, 2009, Vietnam and China, the proportion of orders with 36%. The go-ahead after two consecutive years, 2011, in Vietnam the proportion rose to 39%, while China fell to 33%.
This is not the first time Nike and Adidas factories migration. The two brand originated in Europe and the United States "migratory enterprises is very cost sensitive. In the seventies of the last century, and its main production base in Japan, due to the appreciation of the yen, Japan's labor costs rise, they shifted their production bases to South Korea and Taiwan; 1990s, because of cost reasons, to take his orders for the transfer to the Chinese mainland. Today, Vietnam, Indonesia and other Southeast Asian countries, to become the new promised land.
Nike and Adidas migration has also led to a number of Taiwan-funded background foundries transfer. In early 2012, Stella holding company listed in Hong Kong closed a processing plant in Dongguan, while continuing to enhance the production capacity in Indonesia. Chain from Japan's casual wear brand UNIQLO (UNIQLO) to Southeast Asia as the next migratory land.
In 1999, Uniqlo in Shanghai and Shenzhen to establish the production department. 2007 years ago, 90% of the Uniqlo rests in China. But in 2008, Uniqlo gradually reduce dependence on Chinese manufacturing, reduced to 80% the proportion of China in 2011. This year's annual report shows that the company plans to actively expand production in other Asian countries, in order to reduce costs, "the goal is to shift one-third of production outside China".
In addition to clothing vendors, food price has a high sensitivity. A well-known food companies in North America the past two years to begin direct imports products from overseas, the employee said, "Each of the products produced in China, must have at least one or a few back-country. Once China is losing its competitiveness, can immediately order. "
Not long ago, the European Union Chamber of Commerce in China facing conducted a survey of European companies in China. The survey shows that 22% of the companies surveyed said they are considering investment towards the outside of the Chinese market. When asked about the motive, one of the main factors that rising costs.
This research data show that consumer goods companies tend to evacuate more than industrial enterprises with the former are more sensitive to price.
"Compared with industrial enterprises, the transfer of the production of consumer goods companies faster," Lee said, five years can be basically completed.

we make injection molding and precision injection mold goods, it is belong to 
industrial enterprises, but if you not take care well, it also will move out from china.
reference for china injection molding crisis in our website

reference for injection molding technology on Youtube.

TPE material for injection molding process

I just load a new video on Youtube , for how we produce soft material TPE, TPR, TPU, with full automatically working.

if you face problem on such soft rubber material injection problem

please visit it and hope give you some suggestion.

http://www.youtube.com/watch?v=sISPJLnRdjc

Google---china mould maker like use

Mold build, injection molding products manufacturing, plastic materials have been found in our application, I have been writing on the Google blog for everyone, he recorded each of us progress and failures, and lessons learned from the inside but unfortunately after March of this year, no longer could not land GOOGLE BLOG, but GOOGLE has been my most trusted partners, regardless of previous web page to the black cameo change, or other, he helped real us, this time he did not let our disappointment through the use GOOGLE tools I now can GOOGLE blog write these articles about plastic mold, injection products, plastic products, applications.

Some recent articles, you can also find our new web BLOG, I hope to give you help
1)about soft material use: http://www.plastic-injectionmoulding.com/blog/2012/11/18/chinese-soft-material-injection-molding-and-mould-making-discuss-2/ 
2)about china mould market consider:http://www.plastic-injectionmoulding.com/blog/2012/10/25/india-plastic-injection-mold-request-will-be-up-more/
3)about how to control injection mold tempreture  in china : http://www.plastic-injectionmoulding.com/blog/2012/08/04/how-to-control-plastic-injection-mold-temperature/

actually more information , you can learn from our new website for china plastic injection molding : www.plastic-injectionmoulding.com and our blog


Thanks GOOGLE  give mold injection small businesses the opportunity to give me and always help
I learned from it is a spirit, and better than all the slogans. I hope each of us Chinese people
Can feel the spirit, and then help to more people.

china economy down will cause business problem

National Bureau of Statistics, the data published by the Society of Logistics and Purchasing, August the mainland manufacturing purchasing managers index PMI was 49.2%, 50.0% less than the estimate of 11 economists before. Not only the four consecutive months of decline, and fell below the threshold of 50% of the expansion and contraction of the first time this year.

------ china mould maker is part of News


The economic downturn in our country, I personally think that is yes, the reason is very simple, Originally, we had the past two years the economy is driven by investment of

But the underlying investments too, the fundamental people did not have the spending power. Then 4 trillion bailout money flooding the market but people no money

The world economy is of course not good, to accelerate this thrust, 10 years is 10 years, China's rapid development in the next decade that will be part of the elimination

Out, is inevitably also very cruel.


Our small, but very professional as a mold injection molding plant in China (china plastic injection mold factory)

The same time, we can flexibly according to market demand transformation this economy and developed countries truly viable technology enterprises

Will be similar to this scale and enterprise.


The market is just not the best or the cheapest, the best, but the most suitable for the best market is everything, does not meet the market demand

Will be eliminated. Personally, I see a hard landing of the Chinese economy is in fact already begun. ----- www.plastic-injectionmoulding.com kennyhan

chinese manufacturing down cause more problem happen in coming future

House prices suddenly up again, because everyone fears that the inflation that a few corners will be washed completely.
This big bubble in the real estate if you do not control, that is a nightmare of a real manufacturing
Referenced below under the chopper, Mr. Data, the housing bubble to end all the profits of the manufacturing industry and to promote the economic manufacturing area of ​​bankruptcy, because housing prices will inevitably lead to currency depreciation, currency devaluation conduction to manufacturing on First exchange rate losses, because housing prices, currency instability leads to the central bank's monetary policy loose when tight, while manufacturing investment earnings cycle longer need to monetary policy relative stability in order to develop enterprise scale, while real estate is precisely the shorter cycle of the industry, once The bubbles float to the surface, the central bank must first stabilize the property market will lead to a lot of the manufacturing industry can not cope with the changes in monetary policy. Play a simple example, the the ZTE huge loss, in the first half of 2012, more than half of the losses from exchange rate. Second, many small and medium manufacturing industry is subject to rising production costs and labor costs, but had to bankruptcy, which means that housing prices brought about by the effect of inflation, because the housing bubble will lead to hyperinflation.
Bubble will inevitably bring about a surplus of crisis. Property determines capital flows, where there was money to go out into where to run, once the real estate under the government of misleading will result in huge financial adsorption capacity, leading to the full surplus of real estate-related industries. For example, the float to the surface of the steel, the Chinese real estate bubble, the international iron ore prices from $ 46 a ton quickly jump $ 180 a ton, as of the end of June 2012, China imported iron ore port stocks reached 96.81 million tons, qoq 96 million tons, an increase of 1% compared with last year, an increase of 3.64 million tons, an increase of 3.9%. Now, domestic iron ore prices remain high, while the imports of iron ore has fallen below $ 130. Sources said that the U.S. manufacturing sector has been withdrawn from countries like China, Brazil, Mexico native had 39 percent, expected next year will withdraw 60% of the time, U.S. domestic demand for steel rose to reduce costs, the dollar will also suppress the price of iron ore can dip to $ 46, many of our imports of iron ore is stored in the $ 160, our mining costs have simply stuck atop a high, that the steel prices in the international will be unable to compete and the United States. Other related industries is probably the case, are full of excess, but the costs are high.
The high debt bubble fueled by urban households, a comprehensive curb the spending power of most consumer dynamic groups, increasing the energy of the curb the expansion of consumption. Not long ago, I microblogging and friends to discuss the mortgage the proportion of total household income, said that the most appropriate ratio is 30%, if the vast majority of mortgage family mortgage ratio of 50%, the country's economy is unhealthy, more than 60% There is no doubt that an economic crisis. Did not expect that the vast majority of users are over 60%, one user said his family more than 90%, usually not enough money and use it to find old couple, old couple unable to find a woman old couple, barely hang on until now, but money increasingly Nanzhuan, together with prices rising, the money is more valuable vegetable prices slightly stabilized, and now rice up, I really do not know how?
The Great Depression is doomed, the money Nanzhuan, the unemployment rate will be higher and higher. Because China does not have a few decent manufacturing, China's economy will be increasingly difficult.

My side has begun to run into better company layoff and then re looking for a job, it would be a relatively long period of time, because they are not just graduated
Students, families, and young children, household spending, education, industrialization, industrialization of health care, so that a few years ago can not see, like weakness in the manufacturing sector
Suddenly burst out in the state, a large number of white-collar workers because of age and salary issues can no longer find their previous posts, with the shrinking manufacturing sector
More people will join the team, which is the new 40, 50, who we soon will see, but compared to the original 40, 50, who, apparently, these 40, 50, of hardship ability
Is not enough, now the values ​​of money first, a lot of family issues will rise to social problems. Not to say that Chinese people do not hatred of the rich do? It is of economic buoyancy,
Why are the Greeks so hatred of the rich!

Of course, this is my personal opinion, but I believe in the next five years will see this issue, and will become increasingly serious in the bad state of the external economic
China's only chance of shrinking the real estate bubble, but now see little chance that manufacturing winter quickly.

Molds and plastic products manufacturing companies as a foreign trade, Enhancing soft power was able to spend this winter
After all, stall, good turn around, Oh.
------------------- www.cnmoulding.com www.injectionmoldchina.com www.plastic-injectionmoulding.com

china house market is a form

Chinese family's total net assets over the United States is a terrible foam - china mould company The real driving force behind the still highly suppressed in real estate.The central bank data, as of September 2010 (M2) reached 69.64 trillion yuan, about 5.5 times that of a decade ago. This means that if your wealth does not reach 5.5 times that of a decade ago, then you are in China already "poorer". Interestingly, keep up the beat, Beijing and other major cities, housing prices rose. M2 has exceeded 90 trillion yuan - more than the GDP more than twice, while house prices around to face the most severe macro-control policies, actually continues to rise. Some people even claim that the Beijing Fourth Ring prices and within two years exceeded 100,000 yuan per square meter.This means that as long as these invest in real estate in big cities, you must be at least a net worth of millions or even tens of millions of millionaires, even though real life nothing to improve the quality of the savings of the hands of the pitiful.Thus, the family assets is beyond the United States rely on the bubble of paper wealth, like the establishment of the kingdom in the sand, and reality.European debt crisis, the U.S. financial crisis, the problems are real estateAccording to income ratio of view, the bubble of our real estate crisis, when broken to see the wisdom of our country. china moulding maker trust it will be broken.

save money for all , not like play

---Plastic Injection Molding Tooling Maker
For the private sector, capital is the lifeblood of, often tens of million of funds will be able to save a business, it seems that this news, small business as a mold for injection,Can not help feeling, easy to spend really money is also easy to put it plainly, the country's investment from the tax revenue comes from tens of thousands of private enterprises, if the fundsReturn to the private sector, how much help for the development of business productivity. The people who make money not spend money, spend money to spend wrong and no one to oversee the causes and effects.June 3, 2012, Sujiatun District in Shenyang City, Shenyang Green Island Indoor Arena has been successful blasting, which was once Asia's largest indoor turf football stadium times blastingConstruction area of ​​380,000 square meters, its main facilities include an indoor artificial turf soccer, 30000 fixed audience seats and 6000 seats activities, scalable stage, the exhibition area, Office and athletes accommodation areas. The blasting our monomer blasting the blasting demolition of buildings, but also the country blasting industry, blasting the first time such a large areaSteel structure buildings. The land after the blasting is likely to become future Convention and Exhibition Centre in the CBD area.    

Invest market , china plastic moulding factory new website

--Plastic Injection Moulding Maker---------------------------------------------------------------------------------------------------------------

The falling euro exchange rate, it seems not able to stop, as long as the European economy does not pick up, that the euro still continue to be run down

April economic data in our country once again proves my previous views on the economy is slowing, and impact is less obvious

Met with greater competition in the future, our company's website on the line, www.plastic-injectionmoulding.com
Line with our company's business, the server settings in the United States, more convenient for our overseas customers to visit us, at the same time, this is more for us

Expansion of the injection-molded plastic products business to prepare.

Of course, we continue to provide good service to our customers, design --- rapid prototyping --- mold --- injection --- Processing --- packaging one-stop

The service is the direction and goals of the company, as always.

we can learn much from google

---Injection Molding, Plastic Mould Manufacturers



As a mold injection molding plant engaged in foreign trade, corporate marketing, will be used GOOGLE to work in the past decade
google give our help can be said Lengnuanzizhi can say that GOOGLE is the most fair and software, and he allows us to learn and improve
Own work, serious work, work diligently, steadily and surely to make a fuss about a person, a business, is a national social atmosphere
Must, for our kind of processing plastic injection molding and mold factory, customers choose us, is nothing more than good quality, good service and good after-sales
This is our corporate culture, all enterprises must.
See GOOGLE webmaster article tells us that even such as GOOGLE, great company, but also to promote a reality, opportunistic culture.
Very much hope that China's large enterprises, the whole community has such an atmosphere, that the great revival of our nation to believe that it is not a slogan.

-------------------------------------------------- --------------------------------------------
The following is taken from GOOGLE webmaster articles:
"White hat" search engine optimization often by increasing the availability of the site, to create rich content, or to speed up site speed to benefit both users and search engines. Good search engine optimization also means good marketing: come up with some ideas to build a more attractive site, but also conducive to the development of search engines and social media. A good web site will usually increase the visibility of the site on the network, and this awareness will bring more links or site traffic.
Contrary to the "white hat" SEO "black hat spam. Through the use of some users of the technology is not conducive to the pursuit of higher rankings or traffic, some sites, look for shortcuts or loopholes in the page rank higher than itself, should be ranked. Every day we see all kinds of spam, Unnatural links, keyword stuffing to try to improve your site ranking.
We make changes in the ranking is to help users find the user experience is high, and the website to meet their information needs. We also hope to provide users with excellent site, not just for the algorithm for the network administrator can see the effort to get the corresponding feedback. To this end, we have launched Panda algorithm update in the search results shows the high-quality website. Earlier this year, we launched a page layout algorithms to adjust to lower rank on the first screen (above the fold) lack of adequate and effective website.
The next period of time for the garbage site, we will launch a major algorithm update. Update of the website in violation of Google's existing quality guidelines, the algorithm will reduce the site's ranking. We have been working to reduce the number of spam, this is our effort to reduce the spam Another improvement to the promotion of high-quality content. Although we can not disclose specific information in order to avoid people taking advantage of our search results and damage the user experience, but we encourage site managers to focus on to create high-quality sites, the use of "white hat" search engine optimization to provide users with good experience, rather than radical-spam policy.
Let's all get down to do their job, not opportunistic, such as GOOGLE.

I respect Mr. Buffett is not because he is the Warren

---Injection Moulder, Plastic Molding

-------------------------------------------------------------------------------------
The cause of a lot of people can go hard, go to Bo to go desperately, but they are the face of death, they are often afraid to face, I hope I can be calm, but

I think I can do, so need to learn to master. Mr. Buffett for many people, he shares God, but I think this does not let me worthy of respect

But his life lightly magnanimous, as a people have so much wealth, should be respected.

When a person facing death and then frankly, before we know his heart is kind of quiet calm. Take a look below some Liezi

Was asked Buffett have any retirement plan, Buffett replied: "retirement plans? I die after 5 years to 10 years to say.

2.1986, Buffett said in the shareholders' meeting their own dead and will not sell an Berkshire stock

Each person has various manifestations, Mr. Buffett, I admire his kind of indifferent, especially from a share God's indifferent.

my economic views of China

--- China Plastic Mould, Injection Molded Product
-------------------------------------------------- -----------------------------------------
Although we do molds and injection molding business, but I have been very concerned about the real estate, because I regard him as a benchmark for Chinese economic point of view
The regulation of real estate, from a manufacturing point of view look at this next year will prove my view is correct, take a look I see the quasi-what economists
Thorough understanding.
First look at the manufacturing industry now, so many years of rapid development of the actual in our country, thanks to is a strong export, that is MADE IN CHINA
Infrastructure is easy to boost GDP, but that is virtual, Chinese manufacturing has been off the glory of, and now began the brutal elimination of, there will be many companies
Forced to close due to the price factor. That price changes mainly due to raw material and labor costs. Raw materials has always been dependent on many foreign steel is
Is also crude oil, labor costs continue to rise is unstoppable, a Chinese demographic dividend has been exhausted, from the new migrant workers after 80,90 have only one child
As early as parents' generation to lose the work of the spirit, so bear the brunt of China's manufacturing toys, clothing, footwear such intensive enterprise.
So why the Government to voltage-controlled prices, first I think that is has had to, because of high prices has been hampered by economic development, and help domestic enterprises to survive
Background, depress housing prices has to be done. And even so, the manufacturing decline is inevitable, unless the country will break the state-owned enterprises monopoly, but the state is willing to
Or be able to do so I think that is impossible, unless our economy on a slippery slope, maybe there will be a little loose.
With the decline in manufacturing began to unemployment and declining purchasing power to stimulate the economy, the state will have awareness of the currency devaluation, so do a good job that the Department continue
Manufacturing industry can have a competitive advantage, at least the price of labor-intensive enterprises, competition, the original high prices because of inflation so that prices gradually become reasonable, not prices
Tune, but because the currency devaluation and price cuts, notice, do civil servants and public institutions who will be subsidized, then the private sector need to work harder.
Believe that no major changes in the external environment, our economy continued to maintain its development, but it will gradually slowed down, but still ahead of other countries, because our nation is
Great, hard-working Chinese people. ---- China plastic injection molding maker kenny scribble a few strokes

who we can believe ?

-- Injection Molding , Plastic Mould China

Our society in the end how, milk, milk powder, oil, now even this drug has a problem, but everything people want to eat.

Our food safety problems to the imperative and the moral bottom line of people already do not know

The only remaining possession of all the endless money.
-------------------------------------------------- --------------------------------------

Night to check real-time monitoring system of pharmaceutical distribution, the Food and Drug Administration yesterday to the media revealed that 11 varieties do in Shanghai, with sales in the 13 kinds of products of the enterprise involved in the leather capsule, the Drug Administration Department has ordered companies to suspend sales and use, and giving top priority to carry out the checking and correcting themselves.


City of pharmaceutical sector pharmaceutical manufacturing enterprises in the city, with accessories (including medicinal hollow capsules) strict normalization of regulatory measures, but the detection of chromium content, not done much in the past, have not been found in the previous detection of excessive situation.

china rmb rate is change now

-- mould maker,injection molding

---------------------------------------------------------------------------------------------------
If we say that now most of our foreign trade plastic injection mold company headaches, in addition to rising labor and raw materials, the most troublesome is the exchange rate
In 2011, the company's mold purchase orders, mostly from the euro area, so we settled in euros, but in 2011 the decline of the euro roller coaster for a lot of profit
Loss, a simple example, if 1 million of orders, the exchange rate decreased by 10% loss of 100,000, and this could be the profits of the entire order.
Now and customers are mostly denominated in U.S. dollars, and today the country's new support introduced, do not know if that helps the foreign trade enterprises
Let our eyes wide open Kanba.
Since April 16, 2012, the inter-bank spot foreign exchange market, the RMB against the U.S. dollar trading band by five thousandths expanded to one percent, the daily inter-bank spot foreign exchange market trading price of the RMB against the U.S. dollar within the range of the China Foreign Exchange Trade Center announced the day of RMB against the U.S. dollar central parity of the upper and lower one percent of the float. The designated foreign exchange banks to provide customers with the date of U.S. dollars the highest cash offer price and the minimum cash purchase price of the difference shall not exceed the magnitude of the central parity rate of the day to expand from 1% to 2%, other provisions are still in compliance with the People's Bank of China on the interbank foreign exchange market trading exchange rate and foreign exchange designated banks listed on the exchange rate management issues related to notice. "

china plastic injection, custom injection molding

what is china injection mold maker need!

-- China Mould , Injection Mold

Two days before exposure to a German customer, they need to balance due in the mold shipped to Germany and then to pay for both sides, for the first time, good co-operation, I agreed to their demands.

I am also considering, in recent years, despite our increasing technical inputs to the continuous development of our mold making and plastic products, quality management, price controls

But the overall feeling of the industry more and more difficult, my feeling is that all manufacturing industries, especially the price of the industry have the feeling. China's real producers are private

The private sector basic economic foundation, so the only hard at production, but no development funds, if a manufacturing countries should have developed, the need is the core

The development of science and technology. At present, the manufacturing growth in China is still a serious dependence on foreign technology, many of the core technology and equipment still need to introduce. Numerous examples to prove,

Industry value chain, who mastered the high value-added part of who will be able to profit on the innovative. If long-term stay at the OEM level, will only get a meager profit. Manufacture

Industry to become bigger and stronger, the need to nurture the two core elements: First, to have the core technology, and have mastered the core technology to grasp the initiative in the market; second is to focus on can not be copied

Set up, including in the product design and development capabilities can not easily be replicable, but also a breakthrough on the same marketing model. If our nation can see our real nuclear

The heart of competition in the private processing enterprises, the regulation of the private sector development and support.

For example, such a professional mold manufacturer, Ha ha ha. . . .Plastic Injection Molding ,Mould Maker China

private injection molding company bad situation

--Injection molding injection mold

---------------------------------------------------------------------------

Accordin to the National Bureau of Statistics, 2011, China's urban residents per capita total income is 23,979 yuan, equivalent to about 2,000 yuan per month, including wages and salaries, income, property income, operating income and transfer income was four. The United Nations International Labour Organization has the latest statistics from 72 countries and regions around the world per capita monthly income. These countries and regions, per capita monthly income is 1480 U.S. dollars, or about 9327 yuan. Among them, the average monthly wage of employees in China for $ 656, or about 4134 yuan, ranking the 57 surveys in 72 countries and regions.

The private sector is really difficult, and now, high costs, low wages, but if the domestic labor costs continue to increase, that is, a large number of private sector disaster.

New plastic injection molding products for automobile

----China Plastic Injection Molding Company



Automotive mold the most important part is to cover mold. The type of mold Die. Automotive die in a broad general term for all parts of the mold manufacturing cars. For example, stamping dies, injection molds, forging dies, casting wax mold, glass mold and so on.

The picture shows the newly developed plastic mold company car headlights plastic mold, a very good appearance and mold making.

If you have similar needs, please tell me --- www.injectionmoldchina.com

See China Private Plastic Moulding Company Living situation

---China Mould, Plastic Injection Molding,Maker,Suppliers,Manufacturers


Manufacturing, But our national innovation capacity is poor, is an endorsement from the student's culture, tell the students how to do, rather than
Allow them to think, for the rigid mode of education in China, I often could not help but criticize a fuck, to be shameless, students acting as a proxy.
Consent, the burden on enterprises is also important, I am referring to is the private sector, because our state-owned enterprises do not need to close down and unable to pay wages to worry about
The development of the private sector to benefit also the demographic dividend of cheap labor, but now everything in the past, because the cost of doing business will become increasingly high, and then a is
A reshuffle, our side is that you want to change the development mode, while they have to admit, in China for the development of Chinese enterprises only on behalf of Canadian industry,
Because of piracy and creativity of the lower China to change its development model is basically impossible task.
I feel that way Now we can go is to their own profession to do fine, painstaking, and do a good job, if mode of the electronics industry in Taiwan.
Our company is doing precision plastic mold and molding products, my goal is to do fine, done from a professional to become more professional.
As the private sector, although the external living environment is poor, but I believe, live and go on a real producer ----- www.injectionmoldchina.com

china plastic molding factory need really worker

---Plastic Injection Molding Supplier In China

===========================================================================================


To Diploma of Heroes era has finally come to an end, and I am glad to see this blunt, said 10 years ago, I foresaw this, the prevailing feeling is to encounter a
German technicians to repair machine, he was only six fingers, he told me that when the machine is all repair injuries, he repaired to the airport for 30 years, each sound in the machine, he
Will be able to know where, or even to each screw, I hope that my country is powerful, so true to the hard work of our society really needs.


Blue-collar workers now increasingly Jingui
Reporters to see at the fair, MCC to Heavenly Shanghai thirteen Metallurgical Construction Co., Ltd. for Undergraduates this year out of a base salary of $ 2000, but turned positive after a blue-collar and choose to do white-collar significantly different, which blue-collar jobs, such as field technicians, construction workers working on the production line, skill-based workers, the total monthly income of 3000-3500 yuan, while the administrative staff, human resources assistant, and other white-collar monthly income is estimated that in 2600 -3000 $. Shanghai Bot Graduates blue-collar and white-collar income gap is not so big, it is estimated between $ 300-400, but the company responsible for the recruitment sources, the remuneration policies of their company CEOs will be significantly tilted to the blue-collar, whenever holidays CEOs will first think of the front-line staff, and from time to time to make the blue-collar workers was a pleasant surprise. Now blue-collar becomes more and more a premium, the key is very difficult to find skilled blue-collar. "MCC to Heavenly Shanghai thirteen rule recruiter said, each to participate in the recruitment, received 80 percent of the resume request" in an office . "Although the blue-collar salary is significantly higher than white-collar workers, but many college students or afraid of hardship, and still choose a better working environment and conditions, can be timed to work on white-collar jobs."
Almost all interviewed units, with the rise of labor costs and supply and demand tensions exacerbated, unskilled blue-collar salary would surely be white-collar workers is growing faster.
As a mold and plastic products companies, we are really hard work of the enterprise, the real work ---- www.injectionmoldchina.com

Inflation is happen in china already

----China Plastic Product Manufacturers

Consumer prices are rising is really very powerful, we can all see to appreciate, but in some places will not tell you, here are friends and the news reproduced

Everyone can see for yourself.

================================================== ===========================

In addition to the turnip and cabbage stick 1 per pound, what vegetables no price increases
Garlic per pound, 10 per pound in cucumber, chives 8 per pound, round pepper 14 per pound. . . . . . . .
Leadership from New Year's fire, do not take to the streets to buy food? It can be seen newspaper and television stations there to tell the truth you!

================================================== =============================

For the contents of the net posts, "Border Town Evening News deputy editor-in-chief responsible for Shugang Bin told reporters that the main content of the net posts and basically true, because this report, the newspaper editor-in-chief, Deputy editor-in-chief of interdiction in the post, he is suspended from duty not in the post, just as an ordinary staff continue to work; Luo Xiaoming, the newspaper editor-in-chief, told reporters that the net posts "overstated", Luo Xiaoming said that the matter an internal criticism, he has not suspended, still normal working; Huaihua Municipal Propaganda Department responded said net posts, most of the misrepresentation, the propaganda Department of the only newspaper leadership in the post self-examination and correcting themselves, not suspended from their duties.

Published in the February 4, net posts, posting friends "sgnb2002 said, February 1, Huaihua, Huaihua," Border Town Evening News "Your year is what flavor" to the subject, reported the public satisfaction survey results of the Spring Festival, "involved in the reported price is too expensive during the Spring Festival, the majority of the people was tasteless, the New Year tired, touched a sensitive nerve of the local officers, finds the report do not speak politics to the municipal government face discredit to seriously investigate and punish the persons responsible for "February 3, Border Town Evening News editor-in-chief and executive deputy editor-in-chief of interdiction, deputy editor-in-chief of the charge of the news is removed from office, the newspaper's leadership team almost side of the pot."

================================================== ================================

What are 2011 prices, but our foreign trade industry is the decline in value, to do the mold and plastic products came to me, hehehe -- www.injectionmoldchina.com

Google is the only appropriate market business model---chinese plastic injection molding

----China Molder,Plastic Injection Molding

We have several e-commerce Web site has worked, because it is new, it is believed
Many companies have tried earlier, but it should be said that the effect is not good, a great many e-commerce site mobility, this same message more than sales model is not a good model, he only considered maximize the interests of buyers, but the supplier has no profit, so
Finally able to get orders is the cheapest, but I can say that such a cheap price models are often of poor quality. Read the following reports, my view is correct.
Down 80% within three years
Ma (microblogging) in early 2011, once boasted: the next decade, the vast majority of electric commercial enterprises will collapse, implying that the brutal competition in the future e-commerce industry.
According to statistics, China whose average life expectancy is 2.9 years, what electrical and commercial enterprises will be able to survive more than 3 years? Therefore, Ma's prediction should be changed: the next three years 80% of the electricity supplier will face closure, while the capital winter struck in the second half of 2011, to the number of home appliances to fall seems to accelerate such a possibility.
2012 is a B2C closure of the year, coincides with this view, Liu Qiang East, Chairman of the Board of the Jingdong (microblogging) Mall (microblogging). He pointed out that in early 2010, and 2012 will have at least five large-scale B2C e-commerce company dismal, while the closure of small and medium sized B2C will be more than dozens of
Although the rise of e-commerce industry at the time did not last long, but also follow the law of development of most of the industry: the competition early, the number of companies within the industry continues to expand, the scene of lively debate; As the industry matures, the survival of the fittest, the number of companies will arrest reduction. 2012 will be the first year of the maturity of China's B2C industry, but also start Ebb Tide. -- www.injectionmoldchina.com

china plastic injection molder situation

China's auto industry will not continue the rapid development of mold industry will slowdown ----www. Cnmoulding.com
CNC machining equipment level, companies are have increased their efforts to develop the plastic mold, plastic mold mold species of the most attractive "cheese".

In recent years, China's plastic mold development is very fast. At present, the plastic mold in the mold industry, the proportion of about 30%. As China's automotive, home appliances, electronic communications, a variety of building materials rapid development is expected in the future mold market, the proportion of the total accounted for mold plastic mold will continue to gradually increase the pace of development will be faster than other mold. With the rapid growth of car production and sales, auto mold is a huge potential market for the automobile industry, for example.

According to reports, in a production car, a variety of functional parts have to rely on the molding, only to make an ordinary car is about more than 200 pieces of interior mold, and the manufacture of bumpers, instrument panels, fuel tank, steering wheel needed the large and medium-sized plastic mold, mold industry capacity, to meet the current rate of about 50%. In the construction sector, a large number of plastic building materials instead of traditional materials across the expected 2010 national plastic doors and windows, and plastic pipe penetration will reach 30% ~ 50% market share of plastic drain pipes will be more than 50%, will greatly increase the demand for molds volume. Experts predict that large, sophisticated design plastic injection molds will be widely welcomed.

i not believe it is so cheap

--China Plastic Injection Molder, Custom Mold Supplier

=================================================

Before beginning business, my senior told me, if you come out of the pie, it must be careful, why so much
Happens out of the pie in front of you, the Chinese money than before, but to Europe and America than, you pocket this money counts for nothing, read the following
This report if you still think this is a pie, then the others lie, at least in my opinion, this is not a pie.

"In SouFun see, this piece of Ming Jiao Green Boolean land, located in Lee County, Florida, USA. Online display, each piece of land for sale in accordance with 1000 square meters area, the market price of $ 50,000, $ 24,800 Tuangoujiajin , buy discount of 50% or more, buyers are more permanent land use rights.
"$ 24,800 is the price of land, purchase of land needed to pay legal fees, fees, etc., so buy a 1000 square meters of land, about $ 29,700 in total, about 190,000 yuan." According to the website of the Ms. Lin described the project leader, the land is located near the Gulf of Mexico, Florida, 45 minutes from Miami, to have Disney in Orlando, you need three hours: "At the same land through water, electricity, paved roads, is cultivated land."
We do not view as you believe it? ---- www.injectionmoldchina.com