Chinese economic situation is intolerable to let the decision-making

Various ministries have prepared the introduction of policies to stimulate the market

In the context of the macroeconomic slowdown, frequent high-level reference real estate, revealing a more positive attitude to stabilize the property market. Since October 23, Chinese President Xi Jinping and Premier Li Keqiang total of three times on different occasions talking about real estate, and pass out "to stock" a clear signal. The rise in real estate before mentioned this publicly, during the "two sessions" in this year's National. According to the 21st Century Business Herald reporter, future oriented real estate control policy easing is a high probability event, relevant ministries have good policy reserves, will likely launch in the near future. It is reported that slum upgrading policy area will be the focus of development effort, specific approach to "monetize shed change," which, this is considered not only to digest inventory, also with the decline in real estate investment hedge shed change growth. In addition, real estate credit, taxation and other areas are likely to ease. Centaline Dawei, chief analyst said that as the real estate market as a whole is facing oversupply situation, even if the property market stimulus policies, it will not improve the investment in the short term to take place, new construction and other indicators. However, if appropriate measures will boost market confidence, so that the market will not decline sharply.
cnmoulding say: So, lips that do not care about economic growth, it is to talk about the economy really coming down, big leaders and corporate executives, just as full forehead lawsuit, you look at the following article information:

2009 four state-owned Bank loan balances declined

The balance of China's four state-owned bank loans declined for the first time since at least 2009 this phenomenon. Statistics released by China's central bank on the 16th show, as of the end of October, Industrial and Commercial Bank of China, China Construction Bank, Agricultural Bank of China and Bank of China, the loans totaled 35.69 trillion yuan, representing a reduction of 65.6 billion yuan in September. "The credit slowdown was mainly because banks remain cautious stance on the economic outlook and asset quality." Bloomberg quoted an analyst at DBS Vickers in Hong Kong, Chen Shu Jin viewpoint, in addition, the bank may also be because nearly complete annual lending target and slow down the pace of lending.
Plastic Injection moulding say: This is the degree of economic decline and financial crisis almost a fight it! Able to deal with what can only rely on real estate to pull it, in fact, we have introduced stimulus policies

State pipe provident fund loans to ease restrictions increase the minimum amount of 200 000

State pipe provident fund loans policy easing again. Central state organs housing fund management center has issued, the country managed fund personal loans adjust measures to buy the first set of owner-occupied housing loan application, no longer consider whether the fund had extracted nearly one year, and calculate the loan amount, the minimum amount has been raised . Deal executed from June 12 onwards.
china mold maker say: to stimulate the real estate consumer, behind anything about the situation, in fact, understand, but the situation is grim ah, knowing harm than have to drink ah, what words to officials for the implementation of policies in order to promote sustainable economic growth, it is clear threshold

NDRC: to reduce system costs and corporate tax

Recently, the National Development and Reform Commission Xu Lin Planning Division in accepting the new fiscal interview also mentioned China's consumer demand to upgrade the existing supply system has not been well catered for, on the one hand is the technical ability, on the other hand is the current some unreasonable regulatory regime. Economic growth potential can be released by the supply-side structural reforms and other measures to achieve during the "Thirteen Five" more than 6.5% of GDP target growth rate. He stressed that the supply-side structural reforms with the core idea is to reduce the institutional transaction costs. Were supply-side structural reforms to reduce transaction costs enterprise system, business will be easier to do things conducive to enhancing innovation capacity and improve the quality and efficiency of supply, improve the supply structure. The latter is also the Central Financial Group proposed to reduce the institutional transaction costs and the latter should be combined together. On tax issues, Xu Lin also mentioned the new fiscal: Problems of China's current tax structure, mainly to indirect taxes, less tax from individual residents who are more tax from the corporate body. Tax experts generally view is that China's macro tax burden is not high overall, but from a structural point of view, corporate taxes are too high, this point as an injection mold china company, I was deep. Future direction of tax reform is in a stable macro-tax basis, the tax structure adjustment, increase the proportion of direct taxes, reduce the proportion of indirect taxes. This is a system, the linkage project, not reduce a tax or a few species can do. Although more complicated, but very worth doing, do not reduce taxes, business costs are too high, it is difficult to form a competitive edge.
CNMOULDING: see? That much understand ah, do that? That God knows the ....... This do it, you really have to wait for them to implement the policy in place, you can be sure the economic growth possible, otherwise it is just some of the points is not enough. Of course, investors are too long-term prospects are not concerned, they are more concerned with short-term changes, in fact, the strongest impact on the market today, the news media did not comment too much, or dare.
Emergency decision-consumption policies to stimulate the market resorted to boost the economy, indicating that the downward trend in domestic and international economic situation and grim, has let them intolerable. As the property market stimulus harm than good, it's big troubles, they could not know.

91.2 billion rmb ---how many million of fake and shoddy goods?

In just the past, double eleven Online Shopping Festival

   

Cnmoulding sell high plastic injection molding product only

  Alibaba's transaction volume and then a new high of 91200000000 yuan, an increase of nearly 60%. The data in Ali Carnival but also shocked the world, my large circle of friends constantly heard bursts of "chop" in the sound, always liked excitement I seldom at leisure to bubble a cup of tea, the circle of people browsing, said in the early hours of the morning is chop off the, but there are also many people that simply will not participate because in business speculation of the festival launched products or is raise prices and discount "false prices", or is the quality of the discount of fake and shoddy, "double 11" but is a rampant fakes carnival. Alibaba online shopping platform how many fakes in the run? Talk about it a lot, I really admire the economist LAN Zou teacher said is 40%, circle of friends also said more than half, and often buys me a edit friends speak the truth, she thinks "double 11" online shopping even if it is true it is Jerry had, but now is in the mall to buy also does not necessarily guarantee genuine materials, the same all kinds of tricky trap, a cheap is the. What is now the fake and shoddy goods to the extent of flooding, and return a lot of trouble, but to buy renzai. I am very puzzled about this, so the circle of friends asked me, "what do you do in the United States to buy fake goods?" I think for a long time, actually can not afford to buy a case in the United States to buy fake goods. Say after in the United States to buy things in a specified period (typically one month to three months) return does not need any reason, as long as the invoice and goods, even if the original packaging has been opened can return the original, the mechanism itself is of fake and shoddy business the best and restrict and punish, to say nothing of the various regulatory agencies to complaints, no longer can also filed a class action lawsuit, which will cause astronomical compensation so that undesirable businessman bankruptcy. The former will trigger a government investigation, may even be on the United States Trade Representative Office in the annual selection of "notorious markets" blacklist.

When it comes to the blacklist, Alibaba had on the list too, 

  this year probably was malignancy. Annually in the United States Trade Representative Office should be named "notorious markets selling pirated and fake online platform, Taobao, Alibaba had due to the sale of pirated and counterfeit products and among them. Later in order to list in the United States, Ali did not hesitate to ton output capacity, in 2011 broke collusion fraud of supply in the event that Group CEO Wei Zhe and coo Li Xuhui turnover, while Ali also increased the efforts to solve the brand owner complaints, many efforts have been made to the 2012 U. S. trade representative's office will Taobao was removed from the blacklist. Unfortunately, Ali this electricity suppliers in the past year once again suffered a number of businesses in the complaint, (SA Kering) in New York earlier this year to sue the brand infringement, including some of the world's top 500 brands Trademark Working (Group The) and Spain's famous anti counterfeiting Association (ANDEMA) also criticized Ali in the removal of suspected counterfeit goods is not enough. In early ten, the United States clothing shoes industry association formally requested the office of the U.S. trade representative office to re list the list of Taobao, and said Ali Baba did not want to make a serious reform".

The U.S. market also made a strong response to the fake scandal, 

  Despite the "double eleven" in the business of Alibaba set up astronomical figures, but these days in the United States in the stock price fell, yesterday began to fall back to 80 (see chart). Is known as "Dr. doom" Wall Street bear master, Kynikos associates founder Mr. Chanos recently in public speaking bearish Ali, Chanos for more than a year previously letter oath denier short American bio pharmaceutical company Valeant, unsurprisingly now Valeant's share price has plummeted to KS, now he must short Ali, apparently to provoke the sensitive nerves in the market. What is more, Chanos also recommended investors to buy rival Ali Jingdong stock as a hedge against short Ali, resulting in Jingdong price along with rose, and Ali price consecutive fall.

In the past five days, Ali shares continued to fall

Buy fakes in China rights difficult, in the United States has been from consumers, regulators and government layers of punishment, and finally respond to the market, in the United States, Ali encountered an obvious example. Instead, in front of the hard to buy to buy Tiles, Chengdu, in the course of the communication has encountered a lot of trouble, business customer service insist on delivery no problem, think it is consumers in the pit, although the Chengdu man from the courier door to the demolition of the process are used to record the video, but still representations, and finally had to report, this is forcing businesses to send people to see. Chop hand people how many people have this experience, it seems that only God knows.

China's employment may be a big problem in 2016

CNMOULDING REPORT

Need Job---cnmoulding take picture from web

   China is a manufacturing country, relying on manufacturing to solve the huge low-end employment population. Now the decline of manufacturing, the Internet + innovation enterprises begin to encounter the winter capital, service industry alone is difficult to meet the demand for employment, and the service industry cannot establish the industry system of China's high-end, manufacturing industry is the pillar of China's economy, the wavering, Chinese foundations will be shaken.
This year's export data level dropped.
China is still in a recession. Decline in exports, imports fell faster, resulting in a decline in surplus. Customs data show that in the first 10 months of this year, China's import and export value of 19.93 yuan, down 8.1% over the same period last year. Among them, exports 11.46 yuan, down 2%; imports 8.47 yuan, down 15.2%; trade surplus of 2.99 yuan, expanding 75.3%. In October, China's import and export value of 2.06 yuan, down 9%. Among them, the export of 1.23 yuan, down 3.6%; imports 833140000000 yuan, down 16%; trade surplus of 393220000000 yuan, expanding 40.2%. According to U.S. dollars, imports fell by 18.8% in October, Twelfth consecutive months of decline, but the decline narrowed in September.
Real export data should be consistent with the customs statistics, from the Canton Fair and so on the level of the. At present, the RMB exchange rate and interest rate is not attractive, because many business owners for asset allocation, the need for dollars or Hong Kong dollars, corporate fraud more than the export, less than the power of imports, but rather, will be less than the import. From private enterprise data to see that is the case, the proportion of import and export promotion, the first 10 months, private enterprises import and export 7.28 yuan, down 36.5%, accounting for 2 of my total foreign trade, compared with the same period last year increased by 2.8% percentage points. Among them, the export of 5.13 yuan, an increase of 44.8%, accounting for 2% of total exports; imports 2.15 yuan, down 25.4%, accounting for 12.6% of total imports. A slight decline in exports, imports fell sharply, the settlement will reduce.
Trade data in Hongkong and the mainland is a mirror, the data show that the first 10 months, the total trade value of 1.61 yuan, down 8.1%, accounting for 11.6% of the total foreign trade. Among them, the export of 1.55 yuan, a decrease of 11.7%; 53530000000 yuan from 10% yuan, a decrease of 1.5; the trade surplus of yuan, narrowed 11.8%. According to the data of Hong Kong, following the August recorded of 7.4% decline, the September Hong Kong value of imports of goods for 3531 00000000 yuan, down 7.6%. So far, the Hongkong commodity imports have been falling for 8 months.
So, it's hard to believe that the manufacturing sector is improving. The manufacturing purchasing managers' index is a proof of the weakness in domestic and external demand and weak employment.
October official manufacturing PMI was 49.8, from the PMI five major sub point of view, production, inventory of raw materials, employees and suppliers to the time index declined, only a slight rise in the new orders index. For the same period last year, the new orders and new export orders for -1.9 and -2.8. Domestic and external demand is still weak. Small and medium enterprises to reflect the new PMI data, the new export orders index for the first time to return to the expansion area for the first time in June, but the order is not prosperous, the employment index in the last two years continued to hover below 50%.
In transition to the low-end manufacturing industry in Southeast Asia, South America is a clear trend. Different from around 2003, when the transfer of Foxconn, Nike and other basic construction is not equipped with the basic construction, logistics is not free of obstacles, and now these obstacles are generally resolved. In Europe and the United States supermarkets, from clothes to food, the amount of Chinese goods are in decline, only a household electrical appliance, mechanical and electrical products steady rise, an optimist would say, this is the readjustment of the economic structure of China must go through the pain. Don't forget that China has not been training of low-end labor population.
According to the thirteen five year plan, by 2020, there are 100000000 rural residents into urban residents. At present, according to the resident population, China's urbanization rate has been close to 55%, urban resident population reached 750000000, of which 250000000 migrant workers, 100000000 cities, there are 150000000, and rural population growth is higher than the city. According to the latest data from the Bureau of statistics, China's total population of nearly 1370000000 in 2014, even if the city's resident of 250000000 have a city residence, there are still 520000000 rural residents, there are about 70000000 of the extreme poverty population. From the dynamic point of view, the rural poor population growth rate is higher than the city, if the 2020 if there are about 500000000 of the rural labor force, the Chinese manufacturing industry should do?
To add insult to injury, the cold weather hit the Internet. Recently, Huawei, Baidu, Lenovo, Alibaba, Tencent and other successive large Internet company personnel adjustment. Forward technology in October 21st news, Ali, Baidu has announced a reduction in the recruitment scale, Tencent also came to stop recruiting, so far, BAT three giants in the personnel have the action, fever, fever, capital was poured a bucket of ice water. In fact, the enterprise can go beyond five years of life and death line of no more than 10%.
In terms of manufacturing enterprises, or from entrepreneurial enterprises, China along with employment difficulties, the most difficult transition period is coming, requires extreme practicality and high safety margin of individuals and enterprises, in order to break through the winter.

        Author :CNMOULDING  give Plastic Injection Moulding & Custom Plastic Molds Solution Since 1997                                                                                    

Want to be Chinese Buffett

Want to do "Buffett" in Chinese stock market? Hard
       Value investment is a significant gap between China and the western capital market. The value of the investment has become almost a sarcastic China in the stock market, being stuck in retail often self deprecating "stir fry into shareholders". However, the value of investment in the west is very market, Buffett in the long-term investment in the long-term, not only "fry the stock market as a shareholder", but also speculation into the super rich. In the future of China's capital market, whether there will be a number of "Buffett type" value investors? cnmoulding thought it was very difficult.
China Injection Molding Company-cnmoulding believes that Buffett's success lies in the selection of a number of outstanding enterprises, and long-term holding. However, China's economic transformation is very fast, the original investment value of the enterprise, may be a few years on the decline. Coupled with the current economic downturn of the environment, many listing Corporation difficult. "So how many companies are worth investing in? Here's a question mark ".
He believes that investors should keep pace with the times, to choose those who have the growth potential of the company, but also to choose a new industry, but the judgment
The persistence of emerging industries is very difficult. So in China to do a "Buffett style" value investors are very difficult, there are too many uncertainties.
China's stock market rules of the game will not change within 10 years
Speaking of Buffett, when it comes to the value of investment and long-term investment, have to say that China and the West mature market gap. Cnmoulding believes that China's stock market has its own rules of the game, will not change for 10 years.
He stressed that China's capital market is a new market, there are a lot of non-standard, is a highly regulated market, in this market, you can not completely learn Buffett, to learn the practice of mature markets, or to understand the rules of the game in our emerging markets, so that we can outperform the market."
Cnmoulding believes that China's stock market is a big rule is diversified, he said in the round table forum, do not put all the eggs in one basket". He cited a set of data, if an investor buys all the stocks from the lowest point in 2007, the return on investment is 110%.
"It took us 70 years to become a market from a retail market," Cnmoulding said. "We have not had a history of 25 years, a long way from a mature market. "
The Shanghai Composite Index has been seriously distorted, the gem is likely to have a high innovation
The media brokerage executives, settled the last question is always "cliche" to the market outlook on. The author before the interview Lee thunder is securities department colleagues "thousands of methotrexate methotrexate million charged", be sure to ask optimistic about what sectors and stocks in the fourth quarter.
While he was on the table of the round table, "if I know the answers, I don't have to sit here." But in the interview, he's still awesome made some predictions.
cnmoulding said, thirteen five planning after the introduction of the reform of state-owned enterprises, is a very hot topic. "Which state-owned enterprises are likely to be restructured, which will be out of business, what new business will be injected, I think is the eternal theme in the stock market."
As to the specific point of what? He said, "not too much attention to Shanghai, because it has a serious distortion, far underperformed the stock of all." He believes that the Shanghai composite index is very difficult to innovate, more than 6000 points have become history. However, he believes that the gem, the future of small and medium plates are likely to be innovative high.

Cost Of A Plastic Injection Mold | China injection Molding company

How much does plastic injection molding cost in china?

injection molding cost in china

The most common questions we hear from the customers and the investors are: "how much is the cost of plastic injection molds in china?.
This is a fair question, we know, maybe a bottomless pocket may not be part of your current budget. Injection mold manufacturing may be the largest in the development cycle of consumer spending.
Many factors play a role, and directly affect the cost of creating an injection mold for your custom parts. The price difference is very big, chinese injection mold manufacturers and offshore injection molding machine. In any case, a reliable injection molding machine should be able to provide an accurate estimate of the overall size of the CAD 3D file, or the sketch or your product.

Since 1996 we have been in business and understand all the injection molding machines are not equal. Many die manufacturing is off the coast, in order to meet the requirements of your parts strict tolerances, so be sure to take appropriate preventive measures, in the pre screening a potential injection molding supplier.

This is a direct impact on the cost of your injection mold...

Number of cavities - you will be directly related to the number of cavities in your mold. Fewer cavities require less die work, so the limit is in turn, will result in lower initial manufacturing costs, in order to establish the number of your injection mold.
Since the number of cavities plays a vital role in forming the cost, so the complexity of your part design is what. Complexity can be incorporated into the surface finish machining, where many of the factors that are required for tolerance, fine details or the number of possible will be weakened. In general, the cost of producing an injection mold may be a huge cost. However, as xcentric is the correct understanding of what is good design can help reduce costs and avoid unnecessary expenses.

Types of plastic injection molds in China

 Plastic injection molds to create objects, molten plastic is forced into the mold cavity. They are often used to scale manufacturing operations, creating new products, such as toys, kitchen utensils, caps, mobile phone sets. You can use the injection mold "flash line" extra plastic around the seams discovery projects. There are four main types of commonly used plastic injection molds.

Injection Molding In China

Cold runner mold

Cold runner mold, injection mold is the most common type. The gates and runner mold used for injection of the plastic in each mold cavity. However, the sprue and runner and some hardened once solidified. Workers then these works and recycling. This may cause the waste problem, which may make their economic use.

Two plate cold runner mold

Two plate cold runner mold is so named because they are characterized by two plates together. Only a parting surface that must be located in the runner. This is the easiest cold runner mold.

 Three plate cold runner mold

Three plate cold runner mold has three, which means that there is one pair of parting planes. Three of the manifold, the movable plate and floating panels. Contains half of the gate hot runner plate and the runner-up. The injection system comprising half of the movable plate and the geometric shape of the part. The other half of the rotor included in the floating plate and geometry. The system can be located in any of the parting, and anywhere on the surface can be selected through the sheet to provide flexibility.

Hot runner mold

Hot runner mold provides a different way of plastic. As part of the runners, although a plastic syringe and cool the cold runner, the hot runner mold in the mold and stored in the temperature higher than the melting point of the plastic. This means that the gate and runner sclerosis will never have a chance. This also reduces the amount of plastic waste. However, the hot runner injection mold requires more skill and maintenance, and have a higher baseline costs. However, they tend to save materials according to their own.

CN-moulding is professional injection mold manufacturer, we can make difference kind of mold
for difference kinds of industrial.

Save China's property market Heavy weapon

Save China's property market 2015- high risk now

The central bank announced the mortgage deregulation, and a bailout measures introduced. Policy bailout, investors pay.

National Day eve announcement grabbed gold, nine silver ten nodes in the property market, property market during the National Day caught want to move around, many developers said that it has canceled the pre-discount promotions, the second-hand housing prices around the corner ready to rise.

As a leading indicator of purchase will be changed dramatically. Restriction cancel existing role, October 9 Bank released the first 25 Bank of China Wealth climate index display (survey 1856 off family domestic 26 provinces and cities, and research time for September 12 to September 23 ): no room family and just a family coming from the housing market will to rise 20 percent over the previous period, a well-off family willingness to invest in real estate is expected to rise slightly for the first time this year, is expected to pull the main reason for a slight rebound willingness to invest in real estate.

Part of the market sentiment during the National Day, the subscription amount of commercial housing reached Nanjing National Day Golden Week 2812 sets, daily subscription 402 units, an increase of 47%, a record high. And before September Nanjing cancel the purchase of the property market, the average daily amount of the subscription is only about 200 sets. Beijing Golden Week, the second-hand housing transaction price of 28,243 yuan / square meter, up 6.8 percent compared with September. During the town center turnover ratio increased 6% from the previous month, suburban turnover fell 4.3% MoM, regional changes in the structure pulled up the average price.

Different investors dominate the market in the past, is just round the real estate market characteristics required of consumers debut, if you just need to enter the market of about 10%, and may demand the release of millions of sets. Although it is impossible to ease the real estate risk, temporarily allows the economy to get respite.

Different investors, who lack the rigid demand the ability to pay cash, you need a low-interest mortgage assistance, price sensitive. Policy to allow banks to help those who just need to improve the lives of persons with buyers, a suite, or first mortgage payment completed two suites can enjoy 7% discount rate, who is going to foot the bill so generous?

Commercial banks plausibly to listed public, market-oriented as a shield, mortgage rates fell about 2% number is not small, commercial banks are not timely Huolei Feng. There are only two ways to allow commercial banks to toe the line, or the central bank to continue to release the base currency, if the same as the ECB deposit rate dropped to a negative, I believe that Chinese commercial banks will be willing to release about 5% interest rate mortgage, because, you know, in the middle of the difference is considerable.

Not massive issuance of base money, but also to revitalize the capital market, the mortgage securitization advocate rampant. Bank of New Deal will start mortgage securities capitalization, there will be 10 trillion (possibly more) of RMB funds into the property market.

Asset securitization from the "Financial drugs" sold to the United States around the world. In the 1980s, the United States to test the water this business, mortgage assets in the securities of packaged investment products, by rating, sold on the market Zhangzhuodazui investors want to be lucrative. U.S. interest rate market, the rapid development of the market, the product from the balance of $ 11.1 billion in 1980 to a substantial increase of $ 9.3 trillion in 2007, asset securitization rate mortgage over the same period has also increased from 7.6% to 64%, while the United States real estate the rapid rise in prices, affordable housing, can not afford housing through mortgage securitization, to obtain funds to buy from a house in the suburbs, had three children, a dog on a happy life. Now infamous subprime large securitized products, is one part of it.

Asset securitization is a good thing, but sales, ratings, etc. appear a series of false, when sprinkled with icing posing 3A grade debt securities, asset securitization is a Ponzi scheme for investors, and finally ended with the financial crisis.

China is still in the mortgage securitization kindergarten level, so far, domestic commercial banks only issued three pen MBS, the first pen was initiated by the 2005 Construction Bank, CITIC Trust entrusted with the total size of the issue of 3 billion yuan of China's first pen MBS- - Chien 2005-1 mortgage-backed securities. Since then, the bank has launched a total of 4 billion of Jianyuan 2007-1 personal housing mortgage-backed securities. July 2014, China Postal Savings Bank launched the "Post yuan in 2014 to support the first phase of individual housing loans securitized products (RMBS) in the inter-bank market success tender, with a total size of up to 6.814 billion yuan."

So far, financial institutions have little interest, income is higher than the short financial but lower than credit, mortgage loans are all long-term default rate lowest in good assets, banks have no incentive to spend great efforts to securitization.

Regardless of banks, brokerages would be willing, to hold the monetary base and increase liquidity, securitization is the only way. We can only go after the American model, we do not focus on securitization M2 increased, but the M3, M4, M5 increased substantially, and now banks are reluctant to relax in the hands of a good mortgage in the future, people just need to account for property protagonist, the real estate market volatility, Real estate investment is not a game for the rich, like the steel trade mortgage assets, like changing the loan, the bank bailout of the machine does not take advantage of securitization, to meet the channel costs, benefits and risks for sale, after all find a place to cry.

Financial and Internet era, the wool in pigs, to meet the needs of home buyers mortgage, it is important for investors to buy mortgage assets securitized products in the future, not Joe Smith from mortgage banking, and John Doe from next door.

Just need to buy a house, high net worth people to buy mortgage backed securities, the peace of the world.

The author is a famous chinese mold manufacturer, as a representative of all injection molding china manufacturing industries do not want Chinese real estate continues to rise, but now does not seem to rise is impossible.